-
How to disassemble the rotary faucet？
Jan 11 , 2023
1. If the hot and cold water faucet is controlled by a main water inlet valve, close the main valve. When the hot and cold water inlet pipes are separated, then close the corresponding two valves. 2. Use a flat-blade screwdriver to open the accessory "01 hot and cold mark (handle fixing screw hole plug)" shown above; 3. Use a flat-blade screwdriver to insert into the hole plug (cold and hot mark h...
Read More
-
How to Remove a Kitchen Sink Faucet？
Feb 02 , 2023
1. First, prepare the necessary tools, such as pliers, wrenches, screwdrivers, etc. If you only want to replace the faucet, you need to prepare the parts to be replaced, and then turn off the main valve. 2. Remove the screws behind or above the faucet handle, and remove the fixed handle on the faucet. Some faucet screws are placed under the plastic sheet or the plastic button. In this case, as lon...
Read More
-
The production process of the faucet
Feb 09 , 2023
1. The production process of the faucet Sand core forming→sand core inspection→casting copper alloy smelting→chemical composition analysis and inspection→gravity casting→ceramic sand self-inspection→shot blasting and finishing→appearance inspection→pressure test→machining→appearance inspection→pressure test→lead release treatment→ Polishing→appearance inspection→foreign electroplating→appearance i...
Read More
-
How about stainless steel faucet？
Feb 14 , 2023
The stainless steel faucet is a kind of faucet produced by the continuous development of technology and craftsmanship in the industry. Its appearance has solved the problem of lead in copper faucets, especially 304 stainless steel, which is recognized as a healthy material and has acid resistance. Alkali, corrosion resistance, environmental protection and other advantages. However, this type of fa...
Read More
-
The history of the development of the faucet.
Feb 20 , 2023
Faucets in Istanbul first appeared in the 16th century, four or five hundred years earlier than Beijing. Before the appearance of the faucet, there was a kind of animal-head-shaped "spout" (my translation is not good) inlaid on the wall of the water supply spring, usually made of stone, and a few made of metal. Plus any controlled long runs. In order to avoid wasting water and solve the increasing...
Read More
-
How does the sensor faucet work?
Mar 15 , 2023
1. Principle of electromagnetic induction When people are regarded as conductors, when they are in the magnetic field formed by 50Hz alternating current, electromagnetic induction will occur, so the human body will generate an induced current, which reacts on the original electromagnetic field, thereby changing the original current. When this change is received by the circuit, the water will be re...
Read More
-
Use and maintenance of electric heating faucet
Apr 07 , 2023
Use and maintenance of electric heating faucet 1: the water outlet must be opened when the water, and the air in the tank is completely discharged to check whether the water is full; 2: the unprecedented must be cut off the power supply 3:During the closed installation, the water inlet room must be open during the heating period When you first open the door, don't point the water to people Electri...
Read More
-
Full copper faucet and stainless steel faucet respective advantages.
Apr 13 , 2023
Full copper faucet and stainless steel faucet respective advantages. All copper faucet: at present, all copper faucet can be said to be the most popular choice, because it has a good corrosion resistance, anti-wear, easy to process, antibacterial, long service life and other characteristics. Relatively compared to the price, but also several times cheaper than the stainless steel faucet. Copper ca...
Read More
