How to do with a leaky kitchen faucet:
The faucet leaks, we first have to find the reason, the right medicine. If the outlet is leaking, it is due to the wear of the shaft gasket in the faucet. Use the pliers to loosen the lid and remove the axial insert from the insert and replace it with a new axial insert.
Leakage in the bottom of the faucet: if it is leakage in the bottom of the faucet, it is because of the wear of the triangle sealing ket inside the cap. You can turn the screw loose and remove the tie, then loosen the lid off, then remove the triangle sealing shop inside of the lid and replace it with a new one.
Water leakage at the joint: the faucet leakage may also be water leakage at the joint, the general reason is estimated that the cap nut is loosened, then you can refasten the cap nut or put on a new U-shaped gasket.
Water leakage in the middle of the valve spool: this phenomenon is the damage of the valve spool, and the solution is to replace the valve core. If the faucet leaks, replace the valve spool, which must increase the maintenance costs.
Cell closed after the tap still water: this phenomenon is likely to be loose pressure cap loose valve loose and sealing water, the solution is to remove the handle and decoration cover, put the pressure cap to tighten, and one possibility is the core at the bottom of the coil deformation, cannot seal water, the solution is to remove the valve core, check the bottom of the coil, reinstalled after the reset.