Kitchen sink drain installation tips
April 26 , 2022

The decoration of the kitchen is indispensable to the sink, and the installation of the sink is indispensable to the sink drain. Whether the sink drainer is properly installed or not depends on whether the entire sink can be used well. The sink drainer is installed in the sink. The following is a brief introduction to the installation skills of the kitchen sink drainer.

The sink is an indispensable supporting kitchen utensil product in kitchen decoration. It is mainly used for washing vegetables, washing rice, washing dishes, etc. Generally, there are single basins and double basins; Types of flat basins, under-counter basins, etc., the sinks currently used in the kitchen are mostly made of stainless steel, which is not only not easy to rust during use, but also easy to care for.

Classification of kitchen sink pipes
There are two types of kitchen sink drains, one is a reverse drain and the other is a leak drain.
1. Flip-over drainer: The flap-type drainer can be rotated in any direction at will, causing the water in the basin to leak out. The airtightness of the flap-type drainer will decrease after being used for a long time, so that the basin cannot hold water. Or there is a situation where it cannot be turned over; the flap-type water absorber has a simple structure, is easy to clean, and is easy to replace.

Kitchen Sink Drainers
2. Leaky type drainer: The structure of the leaky type drainer is also relatively simple, which is similar to that of the kitchen sink. The disassembly and assembly procedure of the leaky type drainer is slightly more complicated than the installation of the push-type drainer and the flap type drainer. The sink basin cannot hold water unless it is covered with an airtight cover.

leaky type drainer
3. Press-type drainer: Although the press-type drainer looks good, the press-type drainer is more likely to adhere to dirt, and the entire drainer needs to be unscrewed to clean it, and some of the push-type water absorber has been installed when the basin is installed. It is fixed in the drain hole of the basin, and it is difficult to take it out. Such drainer cannot be thoroughly cleaned, resulting in residual dirt, which is very inconvenient to use. If the drainer is unscrewed and then re-installed, it may be loose and not firm. The kitchen sink often needs to wash dishes and vegetables, such a drain is not easy to clean, so it is better to install such a drain less!

leaky type drainer
Kitchen sink drain installation skills
Kitchen sink drain installation skills: above counter basin installation
The installation of the sink type on the countertop is relatively simple. You only need to open a hole at the predetermined position on the countertop according to the installation drawing, then place the basin in the hole, and fill the gap with glass glue. When using it, the water on the countertop will not flow down the gap. , so it is used more in the family.
Kitchen sink drain installation skills: under the counter basin installation
This type of kitchen sink is installed under the countertop basin installation method. The sink is installed under the countertop, which has more space for use, and the countertop is easy to clean and maintain. However, the joint between the basin and the countertop is relatively easy to hide dirt and dirt, which requires regular maintenance and cleaning.
Kitchen Sink Drainer Installation Tips: No Hole Installation
There is also a new type of kitchen sink that is easier to install without opening a hole during the installation process, and also has many features, such as a style that can be installed at a corner, which can make full use of space. Of course, in order to ensure the installation quality of the kitchen sink, it is recommended that the majority of owners should find a professional installer to install it, and must remember to test whether it is prone to water leakage during use after installation.
Kitchen sink drain installation skills: platform basin installation
This type of kitchen sink adopts the installation method of the flat basin to achieve the effect of seamless installation between the sink and the countertop. The flat edge of the sink can easily wipe water droplets and other stains into the sink, and no stains will be left in the gap between the sink and the countertop, which is safe and hygienic. Because of the seamless installation of sink and countertop, it can have more space for use. The sink matches the countertop perfectly and is in beautiful shape.
Choose D&S Faucets company, we will provide you with the best quality service.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.