-
Precautions for buying water inlet hoses.
Aug 22 , 2022
1. Inside the hose is rubber, stainless steel wire or aluminum wire outside, and use copper joints. You can feel the quality of the hose from some appearances. It feels, the grid is discharged messy; 2. If the joint is black or black, it means that the chrome -plated process is not done well; 3. The number of tooth connecting threads should not be less than 3 teeth (too short, it is easy to seal a...
Read More
-
How does the shower faucet work?
Sep 13 , 2022
The working principle of the shower faucet: 1. The shower is pressurized before the hot and cold water enters the mixing valve, so that the water temperature and water pressure and water output of the shower can be stabilized to the greatest extent, and the phenomenon of hot and cold will not appear. 2. The pressurized shower can limit the flow intelligently, and automatically adjust the water inl...
Read More
-
What is German ktw certification？
Nov 21 , 2022
KTW (German drinking water industry non-metallic parts testing and testing accreditation) represents the German federal health department drinking water system selection and health assessment authority, it is the laboratory of DVGW in Germany. KTW is a compulsory regulatory authority established in 2003. Suppliers are required to comply with DVGW (German Gas and Water Association) regulation No. W...
Read More
-
Do you know what are the faucet accessories?
Dec 05 , 2022
1. The single-control spool mainly controls the water flow of the faucet and is controlled by rotation. Generally, the maximum rotation degree is 90 degrees. 2. The filter element is mainly used as a special tool for purifying water, and it is used in general faucets. 3. Rubber parts, generally O-rings, mainly play the role of sealing, and there are two types of dynamic sealing and sta...
Read More
-
How to remove scale from shower head？
Jan 03 , 2023
To remove the scale inside the shower, you only need to poke the hole with a toothpick, then pour clean water and shake it clean. The specific steps are as follows: take a toothpick Locate the blockage above the shower head and get a clean toothpick. pour water Poke a toothpick into these blocked holes, poke the dirt inside, and pour clean water into it from the end of the shower. shake the shower...
Read More
-
How to disassemble the rotary faucet？
Jan 11 , 2023
1. If the hot and cold water faucet is controlled by a main water inlet valve, close the main valve. When the hot and cold water inlet pipes are separated, then close the corresponding two valves. 2. Use a flat-blade screwdriver to open the accessory "01 hot and cold mark (handle fixing screw hole plug)" shown above; 3. Use a flat-blade screwdriver to insert into the hole plug (cold and hot mark h...
Read More
-
How about stainless steel faucet？
Feb 14 , 2023
The stainless steel faucet is a kind of faucet produced by the continuous development of technology and craftsmanship in the industry. Its appearance has solved the problem of lead in copper faucets, especially 304 stainless steel, which is recognized as a healthy material and has acid resistance. Alkali, corrosion resistance, environmental protection and other advantages. However, this type of fa...
Read More
-
The history of the development of the faucet.
Feb 20 , 2023
Faucets in Istanbul first appeared in the 16th century, four or five hundred years earlier than Beijing. Before the appearance of the faucet, there was a kind of animal-head-shaped "spout" (my translation is not good) inlaid on the wall of the water supply spring, usually made of stone, and a few made of metal. Plus any controlled long runs. In order to avoid wasting water and solve the increasing...
Read More
