-
How to disassemble the rotary faucet？
Jan 11 , 2023
1. If the hot and cold water faucet is controlled by a main water inlet valve, close the main valve. When the hot and cold water inlet pipes are separated, then close the corresponding two valves. 2. Use a flat-blade screwdriver to open the accessory "01 hot and cold mark (handle fixing screw hole plug)" shown above; 3. Use a flat-blade screwdriver to insert into the hole plug (cold and hot mark h...
Read More
-
How to Remove a Kitchen Sink Faucet？
Feb 02 , 2023
1. First, prepare the necessary tools, such as pliers, wrenches, screwdrivers, etc. If you only want to replace the faucet, you need to prepare the parts to be replaced, and then turn off the main valve. 2. Remove the screws behind or above the faucet handle, and remove the fixed handle on the faucet. Some faucet screws are placed under the plastic sheet or the plastic button. In this case, as lon...
Read More
-
The production process of the faucet
Feb 09 , 2023
1. The production process of the faucet Sand core forming→sand core inspection→casting copper alloy smelting→chemical composition analysis and inspection→gravity casting→ceramic sand self-inspection→shot blasting and finishing→appearance inspection→pressure test→machining→appearance inspection→pressure test→lead release treatment→ Polishing→appearance inspection→foreign electroplating→appearance i...
Read More
-
How about stainless steel faucet？
Feb 14 , 2023
The stainless steel faucet is a kind of faucet produced by the continuous development of technology and craftsmanship in the industry. Its appearance has solved the problem of lead in copper faucets, especially 304 stainless steel, which is recognized as a healthy material and has acid resistance. Alkali, corrosion resistance, environmental protection and other advantages. However, this type of fa...
Read More
-
The history of the development of the faucet.
Feb 20 , 2023
Faucets in Istanbul first appeared in the 16th century, four or five hundred years earlier than Beijing. Before the appearance of the faucet, there was a kind of animal-head-shaped "spout" (my translation is not good) inlaid on the wall of the water supply spring, usually made of stone, and a few made of metal. Plus any controlled long runs. In order to avoid wasting water and solve the increasing...
Read More
-
How to choose a faucet water outlet nozzle
Feb 24 , 2023
The majority of consumers, when buying water nozzle, the first to see whether the water nozzle electroplating surface is shiny and symmetrical, pay attention to whether there is peeling, cracking, burning, dew bottom, peeling, black spots and obvious hemp spots and other defects. Second, pipe thread accuracy is the nozzle and hose or pipe connection, when the choose and buy visual thread surface d...
Read More
-
How does the sensor faucet work?
Mar 15 , 2023
1. Principle of electromagnetic induction When people are regarded as conductors, when they are in the magnetic field formed by 50Hz alternating current, electromagnetic induction will occur, so the human body will generate an induced current, which reacts on the original electromagnetic field, thereby changing the original current. When this change is received by the circuit, the water will be re...
Read More
-
How to do with a leaky kitchen faucet?
Mar 30 , 2023
How to do with a leaky kitchen faucet: The faucet leaks, we first have to find the reason, the right medicine. If the outlet is leaking, it is due to the wear of the shaft gasket in the faucet. Use the pliers to loosen the lid and remove the axial insert from the insert and replace it with a new axial insert. Leakage in the bottom of the faucet: if it is leakage in the bottom of the faucet, it is ...
Read More
