neiye
What are the difficulties in installing the wall mounted faucet?
February 28 , 2022
1. After the concealed faucet is installed, the bathroom will look simple and beautiful. This is the advantage of the concealed faucet. If you have a little common sense, the later maintenance will not be very troublesome.

2. There are two difficulties in installation, one is to determine how deep the wall should be dug, and the other is how to connect the hot and cold water pipes. Take a single handle concealed faucet as an example to illustrate, as shown below

Wall Mount Kitchen Faucets for Sale

Wall Mount Kitchen Faucets for Sale

Let’s look at the ordinary concealed main body first. The thickness of the AC section is the thickness of the main body, and it is also the depth of the wall that needs to be dug. The thickness of the AC section is fixed, so it is recommended to buy a faucet first, measure the thickness of the AC section and then dig the wall . Looking at the main body of the embedded box, the thickness of the AC section is the maximum thickness of the embedded box, and the thickness of the BC section is the minimum thickness of the embedded box. The depth of the wall that needs to be dug only needs to be between the BC section and the AC section. The AB section of the embedded box can be cut off with a utility knife. The AB section plays the role of adjusting the thickness of the embedded box, so the main body of the embedded box can better grasp the depth of the digging wall than the ordinary main body. Connecting hot and cold water pipes is no problem for plumbers, but it is a little more troublesome for ordinary people. First, connect the hot and cold water interfaces with PVC pipes, and then connect the two ends according to the water pipe interfaces you reserved. The hot and cold water interfaces of the concealed main body are not fixed. The two interfaces in the picture above are on the same end. If the two interfaces of the main body with double handles are on both sides, they are different, so there is no way to reserve accurate ones. The water pipe interface can only be roughly reserved.

3. The difficulty is the above two points. After the main body is installed, put the decorative cup or cover on it, then connect the faucet and handle, and lock them with screws. When repairing, first remove the faucet and handle, and then take out the decorative cup or cover, you can replace the valve core or do other maintenance.

If you have interest in wall mounted faucet please kindly contact with D&S Faucets Company,we will provide the best quality and good service for you.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact