The angle valve is an angle stop valve. The angle valve is similar to the ball valve, and its structure and characteristics are modified from the ball valve. The difference with the ball valve is that the outlet of the angle valve is at a right angle of 90 degrees to the inlet。

1.Usage

The angle valve has four main functions:

1. Transfer inside and outside water outlets

2. The water pressure is too high, you can adjust it on the triangle valve, turn it down a little

3. The function of the switch, if the faucet leaks, etc., the triangle valve can be turned off instead of the main valve in the house.

4. Decoration

2.Industrial usage

The valve body of the angle valve has three ports: water inlet, water volume control port, and water outlet, so it is called triangle valve.

Of course, the angle valve is constantly improving. Although there are still three ports, there are also angle valves that are not angled.

the angle control valve is similar to the straight-through single-seat control valve except that the valve body is a right angle.

1.The flow path is simple, the dead zone and the vortex zone are small. With the help of the scouring effect of the medium itself, it can effectively prevent the medium from clogging, that is, it has better self-cleaning performance.

2.The flow resistance is small, and the flow coefficient is larger than that of a single-seat valve, which is equivalent to the flow coefficient of a double-seat valve

Raw material (copper, steel, etc.) → cut according to the amount of material used → high temperature forging → machining → polishing treatment → electroplating → assembly